SENNINGER - Atlantis Center Pivot & Linear Irrigation Systems

SENNINGER

SENNINGER PRODUCTS

'We work with long-lasting brands for our customers'

UP3 NOZZLE FLOWS

FEATURES

*

Easy change nozzle introduced in 2008

*

Color-coded for easy size identification

*

Excellent durability

*

Warranted to maintain correct orifice size for five years

UP3 | UNIVERSAL PIVOT PRODUCTS PLATFORM

Developed in 2008, Senninger’s exclusive UP3 (Universal Pivot Products Platform) product line adds significant benefits to the proven technologies of the i-Wob, Xi-Wob, LDN, Super Spray and Xcel-Wobbler UP3 TOP making nozzle changes just a click away.

Growers may want to renozzle to utilize different flow rates on their sprinkler package. Lower flow rates are often used for germination and chemigation. Some growers experience frequent drops in well capacity or simply want to tailor-manage their resources. The UP3 nozzle design offers a quick solution for easy nozzle changes along with two convenient options for nozzle carriers so your next nozzle is always at hand when you're ready to make the change.

EASY-CLEAN/EASY-CHANGE NOZZLE DESIGN (Patented)

Just pinch and pull to remove the nozzle then place and click to re-install. Cleaning and changing nozzles is easy and convenient.
There is no need to disassemble or remove the sprinkler.
The color-coded nozzles are highly visible and easy to identify. The nozzle numbers (corresponding to orifice sizes in 64ths of an inch) are visible on the ears, with half sizes denoted beneath the second digit and the notches on the lower edge of the nozzle.

UP3 DUAL NOZZLE CARRIER (Patent Pending)

To access the secondary nozzle, pinch and pull the nozzle from the applicator, flip the carrier over and click in the secondary nozzle. The carrier is marked to indicate high and low flow nozzles. When installed in the applicator, if HIGH is visible on the carrier, then the lower flow nozzle in in use. If LOW is visible on the carrier, the higher flow nozzle is in use.

UP3 DUAL NOZZLE FITTING

Designed to be used instead of a standard barb x threaded fitting, this device carries two additional UP3 nozzles. Just pinch and pull to remove nozzles and place and click to reinstall. Nozzles are easily identifiable with numbers on the ears. The larger the number, the higher the flow.

Xi-Wob® | WOBBLERS

The Senninger Xi-Wob provides the same low application intensity and uniform distribution pattern that has made the i-Wob the leading pivot sprinkler on the market. The Xi-Wob's patented counter balance technology makes it ideal for installation on semi-rigid PE drops, steel drops, and flexible hose drops when used with the Magnum Weight.

FEATURES

*

Wobbler technology produces low application intensity to preserve soil integrity.

*

Low pressure operation - 10 to 15 psi (0.69 to 1.03 bar) - saves money and energy.

*

Three different models available based on desired trajectory and droplet size.

*

UP3 snap-in nozzle is easy to remove for cleaning or changing. To remove the nozzle simply pinch and pull, then place and click to install.

XI-WOB SYSTEM ASSEMBLY

*

The Xi-Wob must be mounted no more than 1 ft (0.3 m) below the truss rod on semirigid Polyethylene or steel drops. Do not use PVC drops.

*

The Xi-Wob can also be mounted on flexible hose drops when used with the Magnum Weight.

Xi-Wob® | WOBBLERS

LOW APPLICATION INTENSITY

Stream-driven applicators provide good throw distance, but their distinct streams instantaneously place the entire flow in a relatively small area. This more intense application can negatively impact the soil surface. In contrast, the Xi-Wob applies water to a larger area of soil surface, reducing the impact of the sprinkler's pattern on the soil structure. Larger instantaneous coverage offers a slower intake rate to help reduce runoff and wheel tracking.

LOW APPLICATION INTENSITY

The Xi-Wob offers a gentle, more uniform delivery and an even droplet size. Consistently sized droplets help maintain a sprinkler's pattern integrity in wind conditions and are more resistant to evaporation. The Xi-Wob's droplet size can be tailored to the needs of the soil through the selection of proper deflectors and operating pressures.

Three different deflector models based on desired trajectory and droplet size.

*

It is recommended that larger nozzle sizes be used only on soils that are suited for higher application rates.

**

For optimum performance, Senninger recommends the use of maximum spacing for 1-2 spans only.

Note : When outlet spacing exceeds 10 ft (3.0 m), keep Xi-Wobs above crop canopy. This is especially important on high profile crops. Not warranted for rigid installation on offsets or booms larger than 10.5 ft (3.2 m). Longer offsets and booms require a minimum of 2 ft (0.61 m) reinforced flex hose.

Xcel-Wobbler® TOP | WOBBLERS

Senninger has expanded their patented Wobbler technology with a new top-of-pipe Xcel-Wobbler employing the innovative UP3 nozzle. This new sprinkler is designed for low pressure to promote energy savings. It produces a wind-resistant larger droplet size. The gentle rain-like application is suitable for all soils and various terrains.

FEATURES

•

Wobbler technology provides outstanding uniformity over a large wetted area

•

More economical than other sprinkler packages

•

Low pressure operation – 10 psi (0.69 bar)–saves energy and provides larger droplet size

•

UP3 snap-in nozzle is easy to remove for cleaning.

XCEL-WOBBLER SYSTEM ASSEMBLY

•

The Xcel-Wobbler TOP must employ a 10 psi (0.69 bar) pressure regulator (PSR or PSR-2 recommended).

•

Use a 3/4' galvanized nipple or Senninger’s impact-modified thermoplastic nipple into the mainline (maximum 2 feet length). PVC nipples are not recommended.

•

The Xcel-Wobbler UP3 TOP is designed specifically for upright installation on top-of-pipe.

•

The Xcel-Wobbler UP3 TOP is not recommended for a manifold installation of two or more units from a single outlet.

Note : Any modifications or deletions regarding installation requirements will void warranty.

•

It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates.

Pivot Master® | IMPACT SPRINKLER

Senninger’s Pivot Master impact sprinklers distribute water in a low 6° trajectory and are designed to resist wind-drift. Their large diameter of throw means fewer sprinklers are needed.

FEATURES

•

Color-coded band identifies each model based on flow (see chart below)

•

Durable design with an enclosed splasharm spring and bearing for protection from the elements

•

3/4' NPT brass connection for use in galvanized steel fittings

•

Hand Tight Nozzles eliminate the need for tools during renozzling; simply place and twist to install. Nozzles sizes are easily identified with color-coding. Warranted to maintain their correct orifice size for five years

*

It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates. Larger flow models available. Square-orifice nozzles not recommended.

LEPA & CLOSE SPACING

Close Spacing is a water-efficient irrigation practice featuring low-pressure LEPA bubblers.

LDN UP3 BUBBLER ASSEMBLY

The bubbler side of the deflector pad gently deposits water onto the soil surface in a bubbling stream. This aerated cascading stream resists the effects of wind and evaporation. It can also be used to prevent wetting row crop foliage.

LDN LEPA SHROUD WITH BUBBLE INSERTS

The Shroud is used in conjunction with deflector pads containing an insert. Growers can choose either the beige bubble pad insert or the red CM1 pad insert opposite a variety of deflectors based on their soil type and crop. The Shroud deflects the water from the bubbler insert down in a gentle dome-shaped pattern providing complete coverage of the field. Due to its less concentrated distribution pattern, the LDN Shroud can be used on fields without furrows and is often used for germination as well as irrigation.

FEATURES

•

Prevent wind-drift losses

•

Minimize evaporative loss

•

Avoid wetting plant canopy in row crops

•

Achieve a more uniform root zone coverage

•

Can increase yield using less water

EASY CONVERSION TO SPRAY IRRIGATION

For spray irrigation with either the LDN Bubbler Assembly or the LDN with the Shroud, simply twist and flip the deflector. Growers use this mode for germination. Deflectors are available with different trajectories - blue (concave) for a slightly upward spray, black (flat), green (convex) for a slightly downward spray, and white for a higher spray. They are available with different surfaces -grooved or smooth.

FOR OPTIMUM RESULTS, INCORPORATE:

Ball Valve - for easy water shut-off when converting between spray, LEPA and chemigation mode.

*Ball Valve requires F x M adapter when installed over a weight.

LDN® SINGLE

The Senninger LDN (Low Drift Nozzle) was the first spray nozzle providing the option to stack multiple deflector-pads. This widens the wetted footprint of larger flows and produces more uniform droplets that helps match the soil's infiltration rate to reduce run-off.

EASY CONVERSION TO AND FROM SPRAY IRRIGATION

For spray irrigation with either the LDN Bubbler Assembly or the LDN with the Shroud, simply twist and unlock the deflector pad. Flip it over and twist to lock it back in place.
The LDN is incredibly versatile thanks to its various deflector pad options. The surfaces of the deflector pads (smooth, grooved, medium groove, or deep groove) each deliver a different spray pattern and droplet size. Each surface is also available in three basic geometries based on the desired trajectory of throw – flat (black), concave (blue) for a slightly upward spray, and convex (green) for a slightly downward spray.

CHEMIGATION CONVERSION

The LDN offers chemigation pad inserts for corn or cotton. These are designed to produce an upward spray under the crop canopy to wash the underside of the leaves, where pests might hide. To change from irrigation to chemigation mode, simply twist and unlock the deflector pad. Flip it over and twist to lock it back in place. Any LDN Pad can be backed with a corn chemigation pad or a cotton chemigation pad insert.

LDN® PART-CIRCLE

The Senninger Part-Circle LDN is specifically designed to distribute water away from wheel tracks to minimize tracking.

*

It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates.

FEATURES

•

Can be used in conjunction with standard full circle LDNs or other Senninger sprinklers on the remainder of a pivot.

•

Distributes water in a 170° pattern with 17 streams at a 10° trajectory for minimum evaporative loss.

•

Integrated base allows the applicator to be installed directly into a pressure regulator or onto a standard 3/4' NPT female connection with no special threads or fittings required.

•

Maximum radius of throw- up to 29 ft (8.8 m)

•

UP3 snap-in nozzle is easy to remove for cleaning or changing. To remove the nozzle simply pinch and pull, then place and click to install.

SUPER SPRAY®

The Senninger Super Spray has interchangeable deflector pad options to meet various droplet size, crop, climatic, and soil requirements. Its design makes it ideal for surface water due to the distance between the nozzle, deflector and bracket legs.

FEATURES

•

Twenty-two versatile, easily changeable snap-in pads are available

•

No moving parts for longer product life

•

Can be mounted on top-of-pipe or on hose drops

•

UP3 snap-in nozzle is easy to remove for cleaning or changing. To remove the nozzle simply pinch and pull, then place and click to install.

DRAG HOSE ADAPTER

You can apply water directly into the furrow with the Super Spray drag hose adapter and a drag line. The adapter snaps right into the Super Spray, replacing the deflector pad.

*

It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates.

Super Spray deflector pads are identified by their shape (flat, concave, or convex) and surface type (smooth, medium-grooved, or deep-grooved).The shape and surface help control spray pattern and droplet size. Chemigation pads are available in high profile (corn) and low profile (cotton) to reach the underside of foliage. These snap-in pads and UP3 nozzles can be easily changed during the season to fit varying field, flow, and growing conditions.

DEFLECTOR PADS

GOOSENECKS

Senninger goosenecks are constructed of noncorrosive, UV-resistant thermoplastic materials for long life. This reduces plugging from rust flaking sometimes associated with galvanized goosenecks.

FEATURES

•

Three models available: 180º single, 125º single, and 125º double

•

Lightweight for easier handling and installation

•

Lower freight costs

•

Available with either a 3/4' hose or 3/4' NPT male threaded outlet connection or the 180° single is also available with 19mm barb outlet connection.

The Senninger line of 125º goosenecks and truss rod hose slings allow the conversion of wide-spaced machines to closer drop spacing and reduces or eliminates the need for adding extra outlets.

GOOSENECK SYSTEM ASSEMBLY

•

Max recommended pressure: 120 psi (8.27 bar).

•

Max recommended flow: 20 gpm (4543 L/hr) or 15 gpm per side for the double model.

•

Max recommended water temperature: 110ºF (43º C).

•

Ambient temperatures to 150º F (66º C) will not damage goosenecks.

•

Attaches to mainline using galvanized nipple or Senninger’s impactmodified thermoplastic nipple (PVC nipples not recommended)

•

Wrench tighten using nipple hex until snug. Overtightening may cause issues.

•

If using a sealant, use only Teflon tape.

•

When using rigid drops in high profile crops, drop length should not exceed one foot below truss rod.

Note: Any modifications or deletions regarding installation requirements will void warranty.

Goosenecks shown are pre-assembled with Senninger’s impactmodified thermoplastic nipple. Use of other plastic nipples is not recommended. Also available without nipple.

TRUSS ROD HOSE SLINGS

Senninger's single and double 125º goosenecks used with truss rod hose slings provide easy positioning of drops along the span. They help lower application intensity by increasing the wetted area of coverage to promote better soil infiltration.

FEATURES

•

Easy to install

•

Color coded models for various truss rod sizes: 5/8' (rust), 11/ 16' (green), 3/4' (black), 13/ 16' (grey), 7/8' (blue)

•

Securely fastens 3/4' flexible hose to the truss rod to maintain the drop/sprinkler position and allows for easy adjustments

•

Supports flexible hose to prevent kinking and abrasive wear

•

Used in conjunction with the 125º model goosenecks

•

Helps reduce pattern interruption from colliding streams

PSR-2 | PRESSURE REGULATORS

Senninger pressure regulators maintain a constant preset outlet pressure that can be matched to the applicator design, regardless of variations in inlet pressure. This helps maintain sprinkler pattern integrity and performance.

The pressure regulator shall maintain the predetermined operating pressure provided that the inlet pressure is at least 5 psi (0.34 bar) above the expected outlet pressure, but not exceeding the maximum inlet pressure as shown above.

CAUTION: Always install downstream from all shut-off valves. Not NSF certified. Recommended for outdoor use only.

FEATURES

•

Flows: 0.5 to 15 gpm (114 to 3407 L/hr) allows the use of the same model along the entire machine.

•

Each regulator maintains a constant preset outlet pressure based on its flow/inlet pressure.

•

Outlet pressures: 6 to 50 psi (0.41 to 3.45 bar)

•

Tamper-proof housing

•

Very low hysteresis and friction losses

•

100% pressure tested, to ensure quality and performance

APPLICATION INTENSITY

Uncontrolled pressure fluctuations in irrigation systems result in unwanted flow deviations and over and under-watering. These fluctuations occur with the cycling on/off of an end gun, activation of a corner arm, variations in field elevation or water supply. Proper use of pressure regulators helps maintain the overall efficiency of an irrigation system.

PSL / PMR | PRESSURE REGULATORS

CAUTION: Always install downstream from all shut-off valves.
Not NSF certified. Recommended for outdoor use only.

FEATURES

•

Flows: 2.0 to 20 gpm (454 to 4542 L/hr) depending on model

•

Each regulator maintains a constant preset outlet pressure based on its flow/inlet pressure.

•

Outlet pressures: 6 to 60 psi (0.41 to 4.14 bar)

•

Very low hysteresis and friction losses

•

100% pressure tested, to ensure quality and performance

FEATURES

•

Flows: 0.5 to 8.0 gpm (114 to 1817 L/hr) depending on model

•

Each regulator maintains a constant preset outlet pressure based on its flow/inlet pressure.

•

Outlet pressures: 6 to 40 psi (0.41 to 2.76 bar)

•

Tamper-proof housing

•

Very low hysteresis and friction losses

•

100% pressure tested, to ensure quality and performance

CAUTION: Always install downstream from all shut-off valves.
Not NSF certified. Recommended for outdoor use only.